PDA

View Full Version : Signal to noise level


nofish
23/08/2007, 15:56
i have just migrated to you but just prior to this i had a line problem which was fixed by BT.
the bras profile reset itself after 3 days but the Downstream Margin: of 15db has remaind where it use to be 6db
is there anything i can do about this or will the setting eventually reset themselves

THANKS

pnrcrp
23/08/2007, 16:02
If you're on the fastest sync, 8128, then you don't want to change the SNR.

What is your sync?

nofish
23/08/2007, 16:37
the current setting are
DSL Path Mode: INTERLEAVED
Downstream Rate: 5824 Kbps
Upstream Rate: 448 Kbps
Downstream Margin: 15 db
Upstream Margin: 25 db

previously it was connected at 8192 it did occasionally drop slightly but never below 7000.

James
23/08/2007, 17:42
Yeah this is purely a low SYNC speed due to the higher SNR. Unfortunately lately BT are unwilling to budge when asked to reset an SNR target as they say it's been raised for a reason.

James

yorkie
23/08/2007, 18:49
Welcome to ADSL24 nofish,

yorkie.