Electron
23/04/2007, 16:37
My ST-585v6 blocks ports when setup for No-NAT, I have disabled the 585's firewall via the cli and also turned windows firewall off but it still gives these results from shields up
GRC Port Authority Report created on UTC: 2007-04-23 at 14:57:41
Results from scan of ports: 0, 21-23, 25, 79, 80, 110, 113,
119, 135, 139, 143, 389, 443, 445,
1002, 1024-1030, 1720, 5000
3 Ports Open
22 Ports Closed
1 Ports Stealth
---------------------
26 Ports Tested
Ports found to be OPEN were: 135, 139, 445
The port found to be STEALTH was: 0
Other than what is listed above, all ports are CLOSED.
TruStealth: FAILED - NOT all tested ports were STEALTH,
- NO unsolicited packets were received,
- A PING REPLY (ICMP Echo) WAS RECEIVED.
Has anyone got any ideas ?
GRC Port Authority Report created on UTC: 2007-04-23 at 14:57:41
Results from scan of ports: 0, 21-23, 25, 79, 80, 110, 113,
119, 135, 139, 143, 389, 443, 445,
1002, 1024-1030, 1720, 5000
3 Ports Open
22 Ports Closed
1 Ports Stealth
---------------------
26 Ports Tested
Ports found to be OPEN were: 135, 139, 445
The port found to be STEALTH was: 0
Other than what is listed above, all ports are CLOSED.
TruStealth: FAILED - NOT all tested ports were STEALTH,
- NO unsolicited packets were received,
- A PING REPLY (ICMP Echo) WAS RECEIVED.
Has anyone got any ideas ?